Hiniker Snowplows - Salt Spreader, Sand Spreader, Spreader

Salt & Sand Spreaders

6.5 & 8 ft. V-Box
Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Snow removal contractors looking for additional profits will find them in ice control. Private users and municipalities will benefit from the labor saving efficiency of the wide 25 ft. spread pattern. And a big 1.50 or 1.80 yard capacity means you'll spend your time productively, rather than constantly reloading.


•	Available in stainless steel (6.5' & 8') or carbon steel (8')
•	Choice of stainless or carbon steel
•	New swing-away spinner chute for easier unloading and improved trailer hitch access
•	In-cab electric control of starter, throttle, and clutch functions
•	Briggs & Stratton Intek AVS OHV engine
•	Optional easy-access hinged hopper grids
•	Spread salt, sand, or chips quickly and easily with a Hiniker high-capacity 1.5 or 1.8 yard V-box spreader.

View Salt & Sand Spreader Literature (PDF)
Download Salt & Sand Spreader Literature (ZIP)


Optional 2 Piece Hinged Screens		Easily adjustable deflectors allow customized spread patterns up to 25 ft. wide		A convenient swing-away spinner chute provides faster cleanout and easy trailer hitch access.

HOPPER: Formed and welded with continuous electric seam welding on the inside of hopper. The top edge is formed for rigidity. Side slope of 45 degrees allows smooth material flow. An adjustable self-locking feed gate with lever is standard.

GEAR CASE: The conveyor gear case has a
cast-iron housing. A precision-machined, hardened and ground steel worm gear drives a heavy-duty bronze spur gear. Both gears and bearing run in oil and are sealed from contaminants.

SPINNER: 14-gauge spinner chute assembly with
three external adjustable material deflectors provided to control spread pattern. Spinner disc is 12-inch
diameter with three welded fins. Spinner shaft of
C⁄v" diameter steel is mounted with sealed,
self-aligning bearing.

CONVEYOR: Heavy-duty, self-cleaning, heat-treated
pintle chain with 24,000 lb. tensile strength. Two
screw-type adjusters are provided to take up
chain slack.

CONVEYOR DRIVE: Briggs & Stratton Intek OHV
air-cooled, single cylinder, four-cycle engine is
mounted on the rear of the spreader. The engine is equipped with an air cleaner, 12V battery, 12V electric starter, and electric throttle control. An in-cab control panel has engine start, shut-off, throttle, and clutch control functions. A hinged engine hood fully
encloses the engine. An electric clutch engages and disengages the drive sprocket. Power is transferred
to the gear case through roller chain and sprockets.

OPTIONAL EQUIPMENT
•	2 Piece Hinged Hopper Screens
•	Adjustable Inverted “V”
•	Ratchet Strap Tie Downs
•	12-inch Side Extensions
•	High-mount Brake Light

Hiniker Spreaders Specifications

	LEVEL CAPACITY	LENGTH	TOP WIDTH
Model 815/825	1.80 Cubic Yards	115" Overall/96" Hopper	50.5"
Model 625	1.50 Cubic Yards	97" Overall/78" Hopper	50.5"

We reserve the right to amend these specifcations at any time without notice. The only warranty applicable is our standard written warranty. We make no other warrant, expressed or implied.